Tuff-Cast™ is an exceptionally attractive insulated metal wall panel with the look of finished precast concrete. The exterior surface of the panel is a hard aggregated fiber reinforced polymer coating created with the factory applied Tuff Cote® finish system. Tuff Cote® finish offers an extremely durable impact and abrasion resistant coating that withstands severe weather conditions. Unlike field-applied finishes that are vulnerable to damp or cold weather during installation, Tuff-Cast™ panels can be erected in virtually any weather condition. The interior face of the Tuff-Cast™ panel is finished with an attractive Mesa profile and painted with a white polyester coating.
- The look of finished precast concrete with the efficiency of an insulated
- The field-tested and proven Tuff Cote technology
- A durable finish that is highly resistant to impact and abrasion
- A 10-year limited warranty
No profile with Tuff Cote® finish system
Mesa nominal 1/8″ deep; Light Mesa nominal 1/16″ deep, Light Mesa not available for 5- or 6-inch thick panels
Foamed-in-place, Non-CFC & zero ODP polyurethane, FM Class 1 approval
K-factor, Btu in/ft2 hr. °F @ 75°F (24°C) mean core temperature = 0.140.
K-factor, Btu in/ft2 hr. °F @ 40°F (4°C) mean core temperature = 0.126
2″, 2 1/2″, 3″, 4″, 5″, 6″
8′-0″ to 40′-0″
Stucco embossed, G-90 galvanized and/or AZ-50 aluminum-zinc coated steel in 24 Ga. and 22 Ga. with factory applied Tuff Cote finish system
Stucco embossed, G-90 galvanized and/or AZ-50 aluminum-zinc coated steel in 26 Ga., 24 Ga. and 22 Ga.
Tuff Cote finish system – a hard aggregated fiber reinforced polymer coating
Offset double tongue and groove with extended metal shelf for positive
Fastener and Clip concealed in the side joint
Medium Beige, Antique Bronze, Surrey Beige, Warm Limestone, Light Stone, Light Gray and Stucco White
FM Approved Class 1 with no height restrictions.